|
APRS Digipeatersoftware DIGI_NED |
|
|
|
|
BayCom-USCC-Card The connections needed for the USCC card can be found in its documentation. Here I will only supply the numbering given to the ports and the default setting of the modem clock supply and baudrate:
Port SCC
| Modem-Clock | Baud | Modem
|
|---|
| SCC0 1A | Softclock | 1200 | AFSK (TCM3105) | | SCC1 1B | Softclock | 1200 | AFSK (AM7911) | | SCC2 2A | Disable | 9600 | External | | SCC3 2B | DF9IC-Modem | 9600 | FSK (DF9IC) |
The second SCC controller (Z8530) does not have to be present when the appropriate channels are not used, the first controller is mandatory. Therefore you can also use the 9k6 USCC card (option -PUSCC:::31).
The following table shows the exact clock source for receive (RxC) and transmit (TxC) and also the used encoding mode. The column contains the number to be supplied with the -PUSCC option, the last column shows the equivalent values for the BayCom parameters CARRIER and HENNING. Soft-DCD and Duplex-Operation can be switched on by means of the commands @C and @D.
| -P |
| RxC | TxC | Mode | CARRIER | HENNING |
|---|
| 1 | Softclock | DPLL | BRG | NRZI
| 0/1
| 0
| 2
| Hardclock | DPLL | RTxC | NRZI
| 2-4
| 0
| 3
| DF9IC-Modem | TRxC | RTxC | NRZ
| 1-4
| 1
|
Embedded inside the SCC-Controller:
- BRG Baud rate generator
- DPLL Digital PLL
Connections of the SCC-Controller
|
|
| |
|
| powered by cmsimple.dk
| cmsimple-styles.com template modified by PE1MEW
|